Everything you need to know to navigate our Berlin campus.

As a campus member of Factory Berlin Mitte, you can invite guests and bring them with you on-site. You are welcome to bring the same guest to our campuses for a maximum of two monthly visits. We have a dedicated process in place for guests, which you will find below. Please note that the Community Desk staff may request the ID of anyone entering our premises, including our members’ guests.

If you have any further questions about our Guest Policy, you are always welcome to send us a message via [email protected] or approach our Community Desk team directly.

How do I invite a guest?

• Log in to your Member Profile.
• Click on the ‘My Guests’ button located on the top bar.
• Please give the full name and the email address of your guest and choose the date, time, reason, and location for which you want to invite them.

We’d recommend registering your guest in advance for any important meetings. Please note that we will hold onto the details of your guest (full name + email address) for a period of four weeks, in accordance with the Berlin Senate COVID-19 regulations.

I’ve sent the invitation. How will my guest be able to accept my invitation?

Your guest will receive an email explaining that they have been invited to visit us as a guest and asking them to accept or decline our Privacy Policy. If they accept our Privacy Policy, they will receive an email with the date, time, and location of their invite, as well as a QR code to scan at the Community Desk to check-in.

What happens if my guest doesn’t accept the Privacy Policy?

Unfortunately, guests can only visit us if they accept our Privacy Policy. If they decline it, they will not be able to use the invite you sent and all of their information will be deleted.

However, you can always send your guest a new invite and, if they accept the Privacy Policy this time, the invitation will be finalized and they will receive a QR code for the check-in at the Community Desk.

My guest accepted the Privacy Policy. How does my guest check-in?

The second email your guest receives has a QR code attached to it. When the guest arrives, they are required to scan the QR code at the Community Desk to finalize their check-in. Please note that the QR code is only valid for the day of the invite.

Does my guest have to check in at the Community Desk?

Yes, it is a requirement that all guests register/sign in at the Community Desk before entering the space for security purposes. Please be aware that any guests who refuse to register/sign in will not be granted access to the space.

It is also a requirement that our members pick up their guests at the Community Desk and accompany them throughout their visit. Should the member decide to leave the building (even if it is temporary), the guests are required to leave with them and can come back with them later on.

What if my guest didn’t receive a QR code?

If your guest did not receive a QR code, this is likely because they did not accept the Privacy Policy and thus did not receive the second email with the QR code in it. Should this be the case, you would need to send a new invitation so that your guest could still accept our Privacy Policy.

How will I know my guest has arrived?

Once your guest has scanned their QR code, you will receive an email notification asking to pick them up at the Community Desk.

Does my guest need to check out?

No, your guest does not need to check out when their visit is over. They can simply leave via our Community Desk area, the same way they came in. Please keep in mind that once you leave the building, the guests would have to leave with you.

Can I cancel my guest invitation?

You can cancel your guest invitation up until the day before. Should you need to cancel it on the day of the invitation due to illness, for example, please reach out to our Community Desk team on Slack or via email, so that we could cancel it for you.

What happens if I bring a guest more than two times in one month?

You are welcome to bring the same guest to our campuses for a maximum of two visits per month. After this, the guest will be denied entry until the following calendar month starts. Please keep in mind that we have the right to terminate your membership in case of the repeating violation of our Guest Policy.

Can I invite a member on a Network package as a guest?

Yes, you can invite guests as long as you purchased a Campus Day Pass for yourself.

Which Wi-Fi network can my guests use?

Your guests can have access to the same network as our members, and the details are as follows for both our Görlitzer Park & Mitte campuses:

Network: FactoryCommunityGuest

Password: Factory4ever

Can I bring my children as guests?

Members may bring their children with them as long as they do not disturb any working areas or interfere with the normal work. This does not apply during special opening times, such as outside service or opening hours. Keep in mind that our campus buildings are not designed for children and are not secured accordingly.

Can I bring guests or my children as guests over the weekend?

No, for security reasons that is not possible. Guests and children are not allowed on campus during the weekend as a matter of safety and supervision, since the campus is unstaffed over the weekend. The same rule applies even if you have booked a Meeting Room over the weekend – only members are allowed to access it.

Each campus member of Factory Network receives a Member Card. Your card is linked directly to your Member Profile and therefore cannot be shared with anyone else. The card has to be used for check-in and check-out at the Community Desk area so that we can have accurate records of members entering and exiting our campuses. Additionally, you are also required to use your card to access our community events and meet-ups such as Check Out Drinks, and Community Breakfast.

Please note that we reserve the right to terminate your membership with immediate effect, should you share your Member Card with a third party.

Factory Network loves well-behaved dogs! You will see a lot of them on our premises. Of course, we want to make sure that every Factory Network campus member feels as comfortable as possible, so we came up with a few rules when it comes to our furry friends:

• No dogs are allowed in our quiet areas.
• Furniture is for humans only – dogs need to bring their own beds.
• Dogs must be leashed whilst on campus, even if your dog normally roams free.
• You as the dog’s owner are responsible for any damage they might cause, by either fixing it or paying for it to be fixed.
• Be respectful of other members, not everyone is a dog-lover. If a member asks you to move your dog away from them, please do so immediately.

Most dogs we have had at Factory Network have been great, but we kindly ask you to keep in mind that we reserve the right to ask you to remove your dog from our premises if they misbehave or disrupt the community in an uncomfortable way.

Filming & Photoshoots Organized by Members

If you would like to take some footage/do a photoshoot at one of our Factory Network campuses, you are required to complete this request form at least one (1) week prior to the date. Please make sure to send the filled-out form to [email protected] for Factory Berlin Mitte or to [email protected].

Please keep in mind the following:

• Be respectful of other people in the space and keep the disruption to a minimum (i.e. don’t be noisy, be as quick as possible, do not ask anybody to move from their working areas to accommodate the filming/photoshoot).
• You have the duty to obtain the written declaration of consent of those people who are participating in the production. Insofar as you can see people other than the people who are interviewed (e.g. members, guests, or Factory Network staff), you also have the duty to obtain the written declaration of consent. Exceptions are made in the case of people who are shown blurred or are otherwise unrecognizable in the background.

Filming & Photoshoots Organized by Factory Network

Occasionally, we receive requests from media companies for filming/photoshoots at our campuses, and this is a great opportunity to showcase Factory Network and our community. We will always take it upon ourselves to be respectful and obtain any necessary permissions, but if you feel uncomfortable then please feel free to reach out to our staff or email us at [email protected], or at [email protected] for Factory Hammerbrooklyn.

Moreover, we are always happy to put forward our talented members for filming/photoshoots, so if you would be happy to be interviewed, please kindly email [email protected] or [email protected] for Factory Hammerbrooklyn with the following details:

• Your full name and name of your company (if applicable).
• Your area of expertise/industry/knowledge.

We would be happy to keep you in mind for our future requests and projects.

Designated Filming Zones

Regardless of who is arranging the filming (whether a Member or Factory Network), please be aware that we have allocated designated filming zones on our campuses to ensure minimal disruption to our members:

Factory Berlin Mitte:

• Café/Restaurant*;
• Outdoor Terrace Areas;
• Closed Meeting rooms (bookable via the Factory Berlin app).

Factory Hammerbrooklyn:

• Town Hall;
• Auditorium;
• Closed Meeting rooms (bookable via the Factory Hammerbrooklyn app):
• 1st Floor + 4th Floor can be accessed in certain circumstances if agreed with the Factory Hammerbrooklyn team.

* Please pay attention to whether spaces are closed or not accessible. It is not possible to film in the Cafe/Restaurant spaces outside of opening hours.

Our Community Desk and Security teams reserve the right to request you leave certain spaces at any time, in the interest of security, safety, or upon request from other parties.

If videos, pictures, or sound recordings containing the Factory Network logo, Factory Network Campuses, or other rights owned by Factory Network conflict with the business interests of Factory Network, Factory Network has the right to prohibit their use.

If you would like to have an intern work with you daily at Factory Berlin Mitte or Factory Hammerbrooklyn, they will have to apply for membership too. As with all applications, there is no guarantee that the application will be accepted – so for this reason, please ensure that your intern takes the time to complete the application properly and provide some insight into their motivation to join the community, beyond simply working as an intern. You can also provide your intern with your Ambassador Code for their application to be fast-tracked by our team.

Please keep in mind that the three-month minimum commitment period applies to all members, even interns. We offer priority to applicants who are interested in long-term memberships (rather than the shorter-term memberships that are generally requested by interns) – but we are generally happy to invite people into the community if they can commit for at least three months.

This is because Factory Network is a business club. We take great care in bringing together a group of individuals that are active and keen to contribute and grow together with the community. Another reason for this is that Factory Berlin is largely intended to be a place for cross-collaboration, and interns who work with teams are unlikely to be able to assist with projects beyond their immediate workload (which is, of course, understandable.

Alternatively, you can invite your intern as a guest, however, do keep in mind that our Guest Policy allows for the same guest to come over for no more than two times per month.

As an individual campus member, you do not have access to the Factory Campus after our common opening hours. However, if you are registered with us as a team you can access your office through the Factory App any time.

The Factory Network Campuses are properly fire-protected. Everyone entering our campuses is subject to the Fire Protection Regulations A posted in the corridors. We ask that everyone memorize the escape and rescue routes of their respective locations, which are also posted in the corridors.

All technical equipment such as fire detectors, fire hydrants, electrical distribution and switchboards, telephone exchanges, and heating and ventilation systems must remain freely accessible and unobstructed. All entrances and exits as well as the escape routes and emergency exits are to be kept free without restriction.

Escape route doors with green signal locks, which must be pushed to the side before the handle is operated, so-called door guards, are only to be used in an emergency, for example, in the event of a fire alarm. They are not considered general access doors. Misuse of the door guards will have consequences for whoever misuses it.

In the event of a fire, everyone has the obligation to cooperate, evacuate, or be evacuated. There is a prescribed number of fire safety assistants in the Factory Berlin team. The orders of the Factory Berlin employees, especially fire safety assistants, and/or security forces, especially the police, fire department, and event director, must be followed. Announcements must always be heeded, and any instructions followed.

As a member, you can use the Wi-Fi at the Mitte campuse. Our guests are welcome to use the same Wi-Fi network and password as our members.

• Network: FactoryCommunityGuest
• Password: Factory4ever

Please check if your devices can receive the following standards.

• macOS: Press and hold the option key and click on the Wi-Fi icon in the top menu bar. Under your current Wi-Fi connection you’ll find the standard next to PHY Mode.
• Windows: Click the Wi-Fi icon to see your current Wi-Fi connection. Hover over the connected wireless connection to see the standard next to Radio Type.

Older laptops/modems may be mainly affected by this and it is recommended that you upgrade them with a suitable USB Wi-Fi stick. For daily use in the campuses, you can also rent a USB Wi-Fi stick at the Community Desk against a deposit (an ID document).

Wi-Fi Issues

If you forget the Wi-Fi password, your Wi-Fi password doesn’t work, or you are generally experiencing any Wi-Fi issues, get in touch with the Community Desk team who will be happy to assist you.

When it comes to accessibility and internet connection, you should also make sure that your network card drivers and operating system are up-to-date. Please check the driver updates on the manufacturer side of your network cards.

Wi-Fi Speed

We make sure to provide the fastest Wi-Fi connection possible for our members. You can expect the speed between 20 and 120 Mbit/s, depending on the number of people in the space, your exact location, etc. However, there is a potential 10Gbit/s upload/download rate at the Factory Berlin Mitte and Görlitzer Park campuses.

Firewall

Our Firewall makes sure that the network load is balanced, no FTPs are accessible, but please do not forget about some basics: please do not download/transfer extremely large volumes of data (more than 20 Gb), browse responsibly, and try not to create hotspots from your phones, laptops, etc. All of that may and will reduce the Wi-Fi quality for everyone else, and we would not like for that to happen.

Blind spots

Due to the nature of the building construction at our campuses, it is completely normal to experience lower Wi-Fi quality in some ‘blind spots’ (simple check: if you are surrounded by three concrete walls, there will be no Wi-Fi). We also have other companies and devices with Wi-Fi channels in the building, so from time to time, it is normal to experience temporary frequency interference.

Lockers

You will find lockers in the Community Kitchens on the 1st, 2nd, and 3rd Floor of our Görlitzer Park campus. You can book a locker directly through the Factory Berlin App. Once you are in front of the lockers, activate Bluetooth on your phone and open the Factory Berlin App, so that your phone can show you the one which is available.

Meeting Rooms

You can book a meeting room with credits directly in your Member Profile. Meeting rooms are priced according to their capacity, starting at 4 credits per hour (20€) for a 6 person meeting room:

• 4 credits (20€)/hour for the smallest room (max. 6 people) → minimum 30 minutes.
• 5 credits (25€)/hour for the regular size room (max. 8 people) → minimum 30 minutes.
• 6 credits (30€)/hour for 10 people; 1 extra credit for every 2 people capacity added.

How to Book a Meeting Room

To book a meeting room:

• Log into your Member Profile.
• Click on ‘Book a room’ on the top of the page.
• Select the desired date for your meeting room booking.
• Select a meeting room from the list of available meeting rooms.
• Select the desired time for your meeting room booking. Each timeslot is 30 minutes, and you can select as many slots as you need. If you want to book a meeting room for more than 30 minutes, please select multiple subsequent timeslots.
• Review and confirm your meeting room booking.

If you don’t have enough credits:

• A pop-up window will appear asking you to top up your credit balance.
• You can select the amount of credits you want to purchase or choose a bundle option.
• Confirm your selection to finalize your purchase.
• Review and confirm your meeting room booking.

To change or cancel your meeting room booking:

• Click on your profile picture located in the top right corner.
• Select ‘My bookings’ in the drop-down menu. You will be redirected to a new page.
• Click on the pencil icon next to the name of the meeting room to modify your booking.
• Choose if you want to ‘Edit’ or ‘Cancel’ your meeting room booking.
• Review and confirm changes or cancelation of your booking.

Please keep in mind the following:

• You will be able to open the booked meeting room with the Factory Berlin App. You should be able to open the door even if the sensor is red.
• You will be the only person able to open the door of the chosen meeting room throughout the duration of your booking. To unlock the door, open the Factory Berlin App, place it next to the electronic sensor, and tap the gateway.
• You can update or cancel your booking penalty-free up to 24 hours before its start. If the change or cancelation is done less than 24 hours before the start of the booking, we will withhold a late cancelation fee of 1 credit (5€).

Meeting Room Tech Guide

How to Use Gateway to Enter the Room

The meeting room can be unlocked with the Factory Berlin App. Once you are in front of the meeting room, activate Bluetooth on your phone and open the App, so that your phone can scan for nearby doors and find the right one.

How to Connect to​ the Wi-Fi

Our members and their guests are welcome to use the Wi-Fi provided at our campuses. Use the following login details to connect to Wi-Fi:

• Network: ‘FactoryCommunityGuest’
• Password: ‘Factory4ever’

How to use HDMI

• Connect one end of the HDMI cable to the TV. In most cases, the cable should already be connected. Should you require assistance to re-plug the cable into the TV, please contact our Community Desk. If there is no HDMI cable in the room, you are welcome to borrow one from the Community Desk.
• Connect the other end of the HDMI cable into your device’s HDMI port. The HDMI port is usually located on the side of a laptop device. If your laptop is a Macbook device, you would need to use an adapter. If you don’t have your own adapter, the Community Desk should be able to lend you one in exchange for an ID card as a security deposit.
• Turn on the TV and connect the cable securely. If your TV has multiple HDMI ports, take note of the HDMI port number you’re using.
• Switch to the HDMI source on your TV.​ Use the ‘S​OURCE’​ or ‘I​NPUT’​ button on the remote to select the HDMI port.
• The HDMI is usually connected to INPUT 4.
• If the remote is not working, then the batteries might need to be replaced. In this case, you can ask for additional batteries at the Community Desk.

How to use ClickShare

Please use the instructions below or watch this video.

HOW TO MAKE A WIRELESS CONNECTION WITH MAC OR PC:

1. Take a ClickShare Button from the Community Desk.
2. Turn the TV on. Select ‘Source’ and then select HDMI 4.
3. Plug the button into the ClickShare box via the USB port (the small black box on the left back side of the TV). Once the Button stops blinking, it is connected to the TV.
4. Remove the Button from the black box and plug it in the USB port on your laptop.
   a. For Mac: Click on the ClickShare icon on your desktop (or search through Finder). Then click on the round icon in the menu bar in the top right-hand corner and choose ‘Activate’.
   b. For PC: Go to Start, Device Manager, click on the ClickShare icon and choose ‘Activate’.
5. Your laptop is now connected. To turn the connection off, press the Button.

HOW TO MAKE A WIRELESS CONNECTION WITH TABLET OR MOBILE PHONE:

1. Turn the TV on. Select ‘Source’ and then select HDMI 4.
2. Download the free ClickShare app for iOS or Android.
3. Open the app.
4. Tap on the settings icon in the top right-hand corner, select ‘Device’ and then Wi-Fi settings.
5. Change your Wi-Fi settings to connect to ClickShare Wi-Fi, specifically for this room (TV Password: ‘clickshare’).
6. Select a host (same room/TV).
7. Go back to the app home screen, choose your sharing option: screen mirroring (Android only), documents, etc.
8. Press the round Button at the bottom of your device to start the connection.
9. On your device, enter the 4-digit password located on the top right-hand corner of the TV screen.
10. Your device is now connected.
11. When turning the connection off, don’t forget to switch back to the campus Wi-Fi.

We kindly ask you to refrain from:

• Using Power Circuits
  Please do not bring your own charging hubs/stations to divide your device between multiple tech devices. We ask that you only charge the amount of devices which the wall outlet allows, as to not overuse, surge, or crash the power in the room or in the building.
• Using Routers or Access Points
  We ask that you do not connect any such advice without the Factory Berlin team’s support, as additional routers or access points can and will affect the quality of the Internet connection for all members in the building.

Meeting Booths

Since these meeting booths serve to facilitate meetings and collaborative work, the priority to use them is reserved for groups, rather than for individual members. Should a booth be empty, you are welcome to use it by yourself, yet we kindly ask you to give priority to any group of members who want to use it for a meeting. The same rule applies for all shared community spaces: use with care, share with others, and keep the noise level in mind.

Keep in mind that meeting booths should be used for no longer than 30 minutes at a time. Before you begin to use a meeting booth, make sure to start the timer on the wall to keep track of the time. After 30 minutes, our Community Desk team and other members are allowed to ask you to let someone else use the booth, if needed.

Phone Booths

Factory Berlin Görlitzer Park has 14 phone booths located throughout the building. Phone booths can be used without prior booking, so if you see one that is available, you can simply jump right in. Phone booths are great for quick phone or video calls when you don’t need a big meeting room. Please keep in mind that the phone booths have to be shared with other members when planning the length of your call.

We have a dedicated multifunctional device for printing and scanning on all floors of our Community Spaces at both campuses.

Factory Berlin Mitte

Both print rooms are located in the middle of the space. Select ‘Black & White’ when you print (otherwise the print jobs will not be processed) and choose on which floor you would like to print.

We offer the following printers:

• Printer-Mitte-0-Floor
• Printer-Mitte-1-Floor

Should you need to print in color, we recommend checking out the nearest copy shop:

Copy Planet
Brunnenstraße 149
10115 Berlin

Printing

Make sure to convert your document into .pdf format before printing.

If you are printing via Wi-Fi, make sure to check the following steps:

1. Check if you are connected to the Wi-Fi ‘FactoryCommunityGuest’.
2. If you have the document in a cloud/received it via email please download it first.

With macOS:

1. Open ‘System Preferences’.
2. Select ‘Printers & Scanners’.
3. Add printer by using the ‘+’ button > Select the printer you would like to print from.
4. Open the downloaded document.
5. Select file on the top of your screen.
6. Select ‘Print’.
7. Select the printer you like to print from.
8. Choose black & white in ‘Settings’.
9. Print.

With Windows:

1. Press the ‘Windows’ icon.
2. Press the ‘Settings’ icon.
3. Select ‘Devices’.
4. Select printer.
5. Select add printer.
6. Add printer > Select the printer you would like to print from.
7. Open the downloaded document.
8. Select the ‘Dots’ icon (or the ‘Print’ icon).
9. Select ‘Print’.
10. Select the printer you like to print from.
11. Choose black & white in ‘Settings’.
12. Print.

With iPhone or iPad:

1. Open the document.
2. Select ‘Print’.
3. Choose ‘AirPrint’.
4. Select the printer you like to print from.
5. Choose black & white in ‘Options’.
6. Press print.

With Android:

1. Open the downloaded document (you can find it in your download manager).
2. Press the icon with the three dots.
3. Press ‘Print’.
4. Select ‘All Printers’.
5. Select the printer you like to print from.
6. Choose ‘Black & White’.
7. Press the ‘Print’ icon.

Via USB-Cable (Mitte only):

1. Plug in the USB-Cable.
2. Add the printer.
3. ‘Settings’ > ‘Printer’ > ‘Add Printer’ > ‘KONICA MINOLTA C346Series’ or see which printer is displayed under USB connection.
4. Open the document.
5. Select printing.
6. Select the printer.
7. Choose ‘Black & White’ in the ‘Settings’.
8. Print.

Print via USB-Stick:

Printers at the Mitte campus support USB flash memory of FAT32 format only.

Printers at the Görlitzer Park campus support USB flash memory of FAT16 or FAT32 format only.

Other types of storage devices are not compatible.

1. Plug in the USB-Stick (next to the display on the right side).
2. Press ‘Menu’ button > top right next to the display.
3. Select ‘USER BOX’.
4. Press ‘System’ > left side of the display.
5. Select ‘External Memory’.
6. Select the file you like to print and press the ‘Print’ button > right side of the display.
7. Select your print format > color: only black.
8. Press the ‘Start’ button > large blue light green button below the display.

Cables and other equipment

You can borrow media equipment such as adapters, chargers, and cables from the Community Desk team. Please note that you will be required to leave your ID card as a deposit and you can borrow equipment only for one day. If you’re not sure how to operate a TV or which cable you’ll need, please contact our Community Desk team.

Troubleshooting Tips for Printing, Scanning & Photocopying

Please check below for possible issues. If you need any help, please post your question on the #-ask-factory_staff Slack channel or approach our Community Desk team directly. 

Printer Issues

For possible printer problems you can also download and install the original drivers. It can happen that the driver is updated and that the system manufacturer takes longer to update the driver until it is available. There have been several updates on Windows that caused and fixed printer problems in the connection.

Printers:

• Campus Mitte: Konica Minolta C224e
• Campus Görlitzer Park: Ricoh IM C2000

Checklist of possible issues

• Reset: If you frequently change locations with your laptop, smartphone etc. or have not used the printer/scanner for a longer period of time, you should delete the existing data of the device (printer) in your system settings and add the device/printer (e.g. ‘Printer-GP-1st-floor’ or ‘Printer-Mitte-0-Floor’) again before printing or scanning.
• Operating System: Check if your operating system up-to-date (iOS, Windows, etc.).
• Format: Print the document in the correct format: A4 , Black & White, output tray.
• Device driver: You can also download and install the original driver for your operating system from the manufacturer’s website:
  Printer Mitte
  Printer Görlitzer Park
  
• Adobe PDF: If you misprint or cancel the print job of a .pdf document, open the file with another software that can open these files and try to print again or vice versa. Try to use the Adobe Acrobat Reader.
• Print approvals: Check if print approvals are available.

As a Factory Berlin Member, you can enjoy a 20% discount on all food and drinks when you present your Factory Berlin Member Card.

Current Opening Hours

Factory Kitchen Mitte: Currently Closed for Renovaton

Späti (Factory Kitchen Fridges)

We have fridges with sandwiches, salads, sushi, yogurts, chocolate bars, and chips, as well as beer and soft drinks at both Berlin campuses. Keep in mind that you can only pay by card if you buy something from a Späti fridge.

If you want to buy something, follow these simple steps:

• You take the product(s) you want;
• Selects the product(s) you chose at the payment terminal;
• Make your payment with an EC/Credit Card or ApplePay.

Factory Berlin Restaurant & Café Etiquette

• We kindly ask you to use one of the Community Kitchens, if you brought your own food. The only exception is if you are with a friend who has bought lunch from the Restaurant/Café.
• If you are planning on leaving the Restaurant/Café area, please order takeaway. That way we have enough plates, cups, and cutlery for those who dine in. We have Factory Berlin mugs that you can take anywhere around the building – this is the best option for your takeaway coffee or tea.
• Please keep in mind that the magazines in the Café are there for customers to read and not to take with them. If you would like to get one of the older magazines feel free to ask the Café staff.

At Factory Berlin, we’re all about people and interactions. This is why we’d love to meet you and introduce you to our community at a Meet & Greet. During this one-hour session, you’ll learn how to get the most out of your membership, as well as meet the Factory Berlin team and your fellow members.

How does it work?

You can sign up for a Meet & Greet session directly in your Member Profile under ‘Manage Membership’ > ‘Meet & Greet’. Joining a Meet & Greet is optional and you can only sign up to one session. Meet & Greet is held several times per month, both online via Zoom and on-site at our Görlitzer Park campus.

Online Meet & Greet

Should you sign up for an online Meet & Greet, you’ll receive an email on the day of the session with the invitation to a Zoom video call 15 minutes before it starts. We kindly ask you to cancel your participation, if for any reason you cannot make it to the call. You can always reschedule for a different session directly in your Member Profile.

On-site Meet & Greet

Should you opt for an on-site Meet & Greet, you’ll receive an email upon your registration outlining all necessary information for the upcoming session.

If you have any further questions regarding Meet & Greet, you’re always welcome to contact us at [email protected].

Every second Thursday of the month we’ll gather for a relaxed beer (or two) at the Community Hub to get to know each other, with some short-and-sweet open mic project pitches, and plenty of time to chat and hang out.

Join us for an evening of music from one of our resident Factory Berlin DJs, a program of art installations, product pop-ups, and other activations. This monthly social networking event aims to bring together our community, welcome new members, and offer up a night of fun(ky) vibes. Come along on a Friday to celebrate the end of another hard work week, and share the successes of your month over a beer and a boogie.

Every second Wednesday of the month all Factory Berlin members are invited to join us in an informal atmosphere to grab some food and coffee, and have a face-to-face chat with other fellow members, as well as our team.

Can I join Community Breakfasts to share my product with the community?

We do often invite members to co-host events with us by either sponsoring the event or providing product samples in exchange for a booth. If you would like to take part in one of our Community Breakfasts, you are welcome to send us a message at [email protected] with a short description of your business and how you can contribute to the event.

Events at the Community Hub

Factory Berlin is the place where you can grow by sharing your knowledge with the wider community, find support, get feedback, and simply connect with other like-minded members. In October 2022, we opened up the Community Hub – a newly designated space set up with the purpose to allow our members to host a range of community-led events. You can submit your event proposal here, if you would like to host a workshop, a masterclass, or a meet-up at Factory Berlin and share it with the greater community.

Selected applicants can:

• Host their events at the Community Hub free of charge;
• Utilize basic event tech equipment + event furniture;
• Receive support with their event promotion.

Please keep in mind that all submissions coming our way will be subject to our curation. The decision will be taken with a consideration of the industry, the audience, the credibility of the content and expertise level of the speaker, the purpose of the event and how the event will fit into the larger programming and schedule.

Bigger events at Factory Berlin

We’re happy to support you with event management services and the selection of fitting event spaces on our campuses.

If you are looking to organize a bigger meeting, booking a meeting room or a workshop room for more than two hours per day might be the suitable option. To book a meeting room for more than two hours, please fill out this form.

For bigger events hosted by our members, we offer a discounted rental fee for each of our event spaces. These prices vary depending on the size/type of room. The events can be hosted to a private/exclusive audience or made public to our community. Our spaces can be rented out for half a day or a full day. We kindly ask you to send your request via this form with all necessary information on your event.

Check out this page to find out more about our event spaces and current prices.

Make sure to add our ‘Factory Berlin Events’ to your own Google calendar, if you want to stay up-to-date with our events across all our campuses. You can add it to your own Google calendar by selecting ‘add’ when opening the link above. You can always tick the box next to ‘Factory Berlin Events’ in the sidebar to hide it and tick it again whenever you want to view all the cool events happening here.